Sample preparation by McCrone Micronizing mill before XRD/Rietveld test

In the cement science field, XRD analysis combined with Rietveld method can give quantitative results of crystalline phase of hydration products, so I try to use XRD/Rietveld method to quantify the hydration products of cementitous material. To achieve good performance of XRD test, fine powder is required and of great importance. The question is how fine the particle sizes should be? It is showed by research that the particle size of powder has to be reduced to 10 μm or less, which is especially important for quantitative analysis (Smith, 2001). ...

2012-09-20 · 2 min · 297 words · Cement Science

Does particle size of slag influence its reactivity?

It is mentioned previously that the reactivity of slag is influenced by its fineness of grinding (specific surface area) that is determined by the sizes of slag particles. The finer the slag particles, the larger the surface area, which means higher hydration degree of slag. However, if disregarding the fineness, in other words, take two slag particles with significantly different sizes (diameters of “spherical” particles) as the study target, do the reacting front layers of the two particles grow at same rate? The growing rate of reacting layer can be a good tool to calculate the hydration degree of slag at particle level. ...

2012-09-18 · 3 min · 529 words · Cement Science

Processing of Granulated Blast Furnace Slag and its applications

Granulated Blast Furnace Slag (GGBFS, or GGBFS, or BFS) is the most used material in cement industry to make slag cement. How is GBFS made? What are the processing and its applications? Process: water quenching Generally speaking, GBFS is formed by water quenching. The glassy and granular material is generated when slag is rapidly chilled by immersion in water. The most common process for granulating blast furnace slag involves the use of high water volume, high pressure water jets in direct contact with the molten blast furnace slag at a ratio of approximately 10 to 1 by mass. The molten blast furnace slag is quenched almost immediately to form a material generally smaller than a #4 sieve. ...

2012-09-07 · 3 min · 447 words · Cement Science

Published literature data on the reaction degree of slag

Although it is somewhat difficult to measure the reaction degree of slag in slag blended cement comparing with the case in Portland cement, many researchers performed experiments on this field. A large body of literature can be found on the kinetics of Portland cement/slag blends. Based on the modification of Takashima’s salicylic acid extraction method, Taylor collected some researchers’ data on the reaction degree of slag, as is showed in Table 1. ...

2012-08-09 · 2 min · 311 words · Cement Science

Kinetics of cement: Degree of hydration or Degree of reaction?

It is so common to see the terms “degree of hydration” and “degree of reaction” in research field of cemetitious material, such as cement or blended cement, especially when we focus on the kinetics. Here comes the question, what is the difference between the two terms? are they actually the same meaning? I was confused by the two terms when I read a huge number of papers and found not so many researchers make them clear or maybe they do not realize the difference either. ...

2012-07-19 · 2 min · 297 words · Cement Science