Methods to measure the reaction degree of slag in blended cement

The reaction degree of slag in blended cement is difficult to measure using those methods which are successfully applied for Portland cement. Demoulian et al. described a method based on extraction of the constituents other than unreacted slag with a reagent based on Ethylene Diamine Tetraacetic Acid (EDTA), finding it effective for determining reaction degree of slag in unhydrated blended cements. EDTA has long been the most used and well-known method to measure the reaction degree of slag in blended cement; however, as stated by Luke and Glasser, special care should be taken when applying this method, e.g. systematic error may occur due to the residue of hydrotalcite in the extraction of unreacted slag. ...

2012-07-14 · 2 min · 346 words · Cement Science

Overview of global cement price 2012

Several days ago, I posted that the global cement output is decreasing in the first half of 2012. So how about the price trend of cement worldwide? Is it increasing or not? Information from different sources shows the prices of cement varies worldwide. For instance, prices of cement in South Africa had been retailing at US $186-230/ton in March of 2012. Due to an acute shortage of cement in Ghana, cement price has rapidly risen over the latest 12 months by 25% in the capital Accra and by up to 35% in rural areas. ...

2012-07-10 · 2 min · 236 words · Cement Science

Factors influence the reaction degree of slag in slag blended cement

The hydration kinetics of slag is generally divided into three stages: (1) a nucleation period during which product growth is accelerating, (2) a phase boundary controlled stage, and (3) a diffusion controlled stage. The reaction degree of slag in blended cement is influenced by many factors. The main factors affecting the reaction of slag in blended system include the reactivity of slag that could be defined as (C+A+M)/S, the fineness of grinding (specific surface area), the vitreous fraction of slag, the replacement level of slag in blended system, the hydration temperature and the water/solids ratio. ...

2012-07-09 · 1 min · 202 words · Cement Science

What is cement and its history?

Cement, the gray and fine powder, is the most used construction material on the world. However, how many people do they know what cement is? the answer for this question from Wikipedia is as follows, In the most general sense of the word, a cement is a binder, a substance that sets and hardens independently, and can bind other materials together. The word “cement” traces to the Romans, who used the term opus caementicium to describe masonry resembling modern concrete that was made from crushed rock with burnt lime as binder. ...

2012-07-07 · 2 min · 310 words · Cement Science

The worldwide cement output is decreasing in 2012

As reported by China Daily, the official Chinese newspaper in English, China’s cement output growth drops sharply in the first five months. The output grew 5 percent from a year earlier to 793.98 million tons; however, the growth rate represented a sharp decrease of 14.3 percentage points from the same period of last year, showed by the National Development and Research Commission. The reason accounting for the dropped output of cement is the economic slumps both at home and abroad, which dampened market demands. The strict regulation and control on domestic real estate by the government further reduced the demand of building materials as well. The latest news of Sany company (Sany Group loses 30% of workforce: report) also confirmed the harsh situation of construction industry in China. ...

2012-07-04 · 1 min · 205 words · Cement Science