Advantage of ternary blended cement

The binary cement, e.g. Portland cement blends with slag or fly ash or limestone, has gained great popularity in many countries. However, each kind of binary cement has its own shortfalls, e.g. the addition limestone can reduce the later strength due to its dilution effect, while the reaction of slag is relatively slow in the early ages. To utilize materials more effectively and reduce the cost in construction industry, ternary cement that made with Portland clinkers and other two admixtures may be a better option because it presents several advantages over binary cements. With the development of separate grinding and mixing technology in cement industry, it is becoming more convenient to produce these so-called market-oriented or tailor-made cements. ...

2012-05-31 · 2 min · 284 words · Cement Science

Review of several existing models simulating the hydration of cementitious materials

In the late 1980s, Johnson and Jennings wrote a program which was based on the idea that cement hydration is considered as nucleation and growth of spherical particles in three-dimensional space. HYMOSTRUC was built by K. van Breugel, this model is based on the assumption that the growth of new layers of hydration products is deposited on the surface of cements particles (mostly alite particles considered), which leads to a more heterogeneous distribution of hydration products. The hydrating cement particles are represented as expanding spheres. At the contact zone, where two hydrating cement particles meet, the overlapping volume of hydration products is redistributed around the two touching particles. The model can simulate the development of properties of Portland cement, e.g. the development of hydration and microstructure, the volume changes of the hardening cement pastes, and the effect of geometrical changes of the microstructure on the creep of the hardening concrete. The emphasis of the model is on the formation of the microstructure and the corresponding bulk properties, while the evolution of hydrating product phases is less focused. ...

2012-05-30 · 6 min · 1165 words · Cement Science

Two main methods to model cement-based materials

With the development of computer technology, increasing attention is being paid to the modeling work of cementitious-based materials. Many researchers have been carrying out the research to better model the hydration of cement-based materials in the last decades. It is obvious that a cogent simulation of the hydration of cement-based materials has crucial role in construction industry, such as reducing tedious process of trial and error when doing experiments, facilitating the research of durability of concrete. ...

2012-05-29 · 2 min · 277 words · Cement Science

Brief introduction of limestone cement

Limestone has been utilized as a mineral addition in cement industry for a long time. The latest European Standard (EN 197-1-2000) allows up to 5% limestone as a minor additional constituent, and also identifies four types of Portland limestone cement containing 6-20% limestone (types II/A-L and II/A-LL) and 21-35% limestone (types II/B-L and II/B-LL), respectively. The ASTM Standard (C150-04) allows up to 5% of limestone filler. Since the early 1980s, the Canadian cement standard has allowed the inclusion of up to 5% limestone addition to Portland limestone cement. ...

2012-05-28 · 2 min · 314 words · Cement Science

Introduction of slag cement

Blast-furnace slag (BFS) is formed from a liquid at 1350-1550 °C during the manufacture of iron. When reaching the bottom of the furnace, the liquid slag forms a layer on top of the molten iron due to its lower density. Being separated from the molten iron, the liquid slag is cooled in the air or with water. Depending on the way of cool process, three main categories of BFS could be produced, which are namely ground granulated BFS, pelletized slag and air-cooled slag. ...

2012-05-27 · 2 min · 404 words · Cement Science