Use Vaseline to cover the surface of alkali activated cement paste during setting test

Setting of cement paste is an important property to be measured. So how to measure it? The most common method is using Vicat needle instrument. The European Standards and ASTM both document the detailed method. One of the deferences of the two methods lies on the treatment of the surface of sample. The “Methods of testing cement — Part 3: Determination of setting times and soundness” says “Place the filled mould and base-plate in the container, add water so that the surface of the paste is submerged to a depth of at least 5 mm, and store in the temperature controlled enclosure at (20,0 ± 1,0) °C”. ...

2015-04-26 · 2 min · 379 words · Cement Science

The method to measure the plastic viscosity of cement paste

In the previous post, I introduced the protocol to measure the yield stress of cement paste. I would like to share the method how to measure the plastic viscosity of cement paste. The principle determine the plastic viscosity of cement paste is using the relationship between shear rate and shear stress. Applying a serials of shear rate on the cement paste would result in the corresponding shear stress. After obtaining the set of shear rate and shear stress, the plastic viscosity of the paste is calculated by regression. ...

2015-03-07 · 2 min · 213 words · Cement Science

The right protocol to measure yield stress of cement paste

The rheology of cementitious material paste is complex and difficult to be investigated. One value of rheology is yield stress. The best method to measure the yield stress in laboratory is using the vane method. However, there is no much literature reporting an practical and detailed testing protocol to measure the yield stress of cement paste. Here I briefly introduce the protocol I am using at our laboratory. To obtain stable and reliable results, we should choose the same container and the same mixing procedure. We normally use a plastic beaker with a volume 500 ml, for the beaker has enough diameter and depth for the test without the influence of boundary effect, i.e. the diameter is two times larger than the diameter of the vane. For each test, 270 g of cement is mixed with relevant water at the required water to cement ratio. For the mixing, a high-shear mixer is applied with a shear rate 800 RPM for 2 minutes. ...

2015-02-06 · 2 min · 321 words · Cement Science

How to define particle size?

Particle size is a very important property in the research field of cementitious materials, e.g. modeling, reaction kinetics. Particles are 3-dimensional objects, and unless they are perfect spheres, e.g. emulsions or bubbles, they cannot be fully described by a single dimension such as a radius or diameter. In order to simplify the measurement process, it is often convenient to define the particle size using the concept of equivalent spheres. In this case the particle size is defined by the diameter of an equivalent sphere having the same property as the actual particle such as volume or mass for example. ...

2015-01-23 · 1 min · 147 words · Cement Science

What is Geopolymer cement?

I have been confused by the term “Geopolymer cement (concrete)” for long time. Some researchers told me Geopolymer cement is essentially alkali activated cement/material (AAMs), such as alkali activated slag and fly ash. Since alkali activated slag is indeed a kind of geopolymer cement, it looks logical to consider Geopolymer cement as alkali activated cement. Is it correct? Recently, I read the State of the Art report on alkali activated cement (Alkali Activated Materials State-of-the-Art Report, RILEM TC 224-AAM), finding the description: ...

2014-12-15 · 1 min · 184 words · Cement Science